The Importance of a Clean Fryer

If you run a fryer in your Colorado kitchen, you already know the oil does not stay fresh on its own. Grease, breading, and burnt bits build up in the corners of the fryer well, and over time that residue works its way into every batch you cook. A fryer boil out is the cleaning step that gets ahead of that problem. Done on a regular schedule, it helps fryer oil last longer, keeps fried food tasting the way it should, and protects one of the hardest working pieces of equipment in the kitchen.
Quick Summary
- A fryer boil out is a deep clean of the fryer well using hot water and a boil out cleaner, not just a filter and wipe down.
- Built-up grease and carbon residue break down fresh oil faster, so a clean fryer helps oil last longer between changes.
- Boiling out removes soils from hard-to-reach areas of the fryer that daily wiping cannot reach.
- First Mark Degreaser Fry Cleaner Boil Out (item #DT450) is built for this job and comes in a 24-count case of 8oz packets.
- Each packet is formulated to treat up to seven gallons of water, which lines up with many standard fryer wells.
- A regular boil out schedule supports better tasting fried food and a more consistent customer experience.
- Bar and grill, Italian, Mexican, and pizza kitchens across Colorado all rely on fryers, so this cleaning step applies no matter what is on the menu.

Why Grease Buildup Hurts Your Fryer Oil and Your Food
Every time you fry, tiny particles of breading, batter, and food debris settle into the fryer well. Some of it sinks below the heating element, where it keeps cooking and breaking down long after the food itself has been pulled and plated. That leftover residue speeds up oil breakdown, which means your fryer oil turns dark, starts smoking at lower temperatures, and picks up off flavors faster than it should.
A fryer that looks clean on the surface can still be holding onto old grease in the corners, seams, and heating element housing. Filtering the oil helps, but filtering alone will not remove soil that has baked onto the metal. That is the gap a fryer boil out is designed to close.
What Is a Fryer Boil Out?
A fryer boil out is a deep cleaning process where the fryer is drained of oil, filled with hot water and a boil out cleaner, and then allowed to simmer so the cleaner can break down grease and carbon buildup clinging to the inside of the well. Once the soil has loosened, the water is drained, the fryer is rinsed, and it is dried and ready to be filled with fresh oil.
How Often Should Colorado Restaurants Boil Out Their Fryers
Most commercial kitchens boil out their fryers on a set schedule, often every one to two weeks depending on volume, with busier fryers needing it more often. A kitchen running wings through a game day rush or churning out mozzarella sticks and chips every night is going to build up residue faster than one that fries occasionally. Watching how quickly your oil darkens or starts to smell off is a good sign of whether your current schedule is keeping up.
How to Boil Out a Fryer, Step by Step
The process is straightforward once your team has done it a few times. Here is the general sequence most kitchens follow:
- Drain and remove the oil from the fryer, and clear out any large debris from the bottom of the well.
- Fill the fryer with water to the fill line, following your equipment manufacturer's guidance for your specific model.
- Add a boil out cleaner formulated for fryers, such as First Mark Degreaser Fry Cleaner Boil Out, following the package directions for your water volume.
- Bring the solution to a low boil and let it work, giving the cleaner time to break down grease in the corners, seams, and around the heating element.
- Scrub any stubborn spots with a fryer brush, focusing on hard-to-reach areas that do not get touched during daily wipe downs.
- Drain the cleaning solution, then rinse the well thoroughly to clear out any cleaner residue.
- Dry the fryer completely before refilling it with fresh oil.
Choosing the Right Boil Out Cleaner
Not every degreaser is built for the inside of a fryer well, so it helps to use a product made for the job. First Mark Degreaser Fry Cleaner Boil Out (item #DT450) is packaged as a 24-count case of 8oz packets, and each packet is formulated to treat up to seven gallons of water. That makes it easy to portion out for a single boil out without guessing at measurements. It is built to go after built-up soils in the hard-to-reach areas of the fryer, the spots a quick wipe down never gets to, so your team can get a thorough clean without a complicated process.
Having a dedicated boil out cleaner on hand also makes it easier to stick to a consistent schedule. When the product is simple to use and pre-measured by packet, it is one less reason for a busy kitchen to skip the job during a rush week.
The Payoff: Longer Lasting Oil and a Better Customer Experience
A clean fryer is not just about keeping the equipment looking good. Oil that is not fighting against built-up carbon and old grease breaks down more slowly, which means fewer oil changes and more consistent frying temperatures. That consistency shows up on the plate. Fries, wings, chips, and anything else coming out of the fryer taste fresher, fry up with better color, and are less likely to carry over any off flavors from old residue. For a bar and grill known for its wings, a pizza place with a fryer running fried ravioli or breadsticks, or a Mexican restaurant serving up chips and flautas, that difference is something regular customers notice even if they could not tell you exactly why.
Quick Answer
A fryer boil out is a scheduled deep clean using hot water and a boil out cleaner to remove grease and carbon buildup from inside the fryer well, which helps fryer oil last longer and keeps fried food tasting its best.
Boil Out Benefits at a Glance
- Removes grease and carbon buildup that daily wiping cannot reach
- Helps fresh oil last longer between changes
- Supports more consistent frying temperatures and food quality
- Reduces off flavors and odors from old residue
- Protects the life of the fryer itself
Conclusion
Keeping a fryer clean is one of the simplest ways a Colorado kitchen can protect its oil, its food quality, and its equipment all at once. A regular boil out schedule, paired with a dedicated cleaner like First Mark Degreaser Fry Cleaner Boil Out, takes the guesswork out of the process. Talk to your Performance Foodservice representative about getting First Mark Degreaser Fry Cleaner Boil Out (item #DT450) added to your next order, and build a boil out schedule that matches how hard your fryer is working.
Frequently Asked Questions
How often should I boil out my fryer?
Most kitchens boil out their fryers every one to two weeks, with higher volume fryers needing it more often. Use how quickly your oil darkens or picks up an off smell as a guide for whether to tighten up your schedule.
What is the difference between filtering oil and doing a boil out?
Filtering removes particles that are suspended in the oil while it is still in the fryer, but it will not clean grease and carbon that has baked onto the walls, seams, or heating element of the fryer well. A boil out is a deeper clean that targets that buildup directly.
Can a boil out help my fryer oil last longer?
Yes. Removing grease and carbon buildup from the fryer well means fresh oil has less old residue working against it, which generally helps the oil stay usable longer between changes.
How much First Mark Degreaser Fry Cleaner Boil Out do I need per fryer?
Each 8oz packet of First Mark Degreaser Fry Cleaner Boil Out is formulated to treat up to seven gallons of water, so you can match the number of packets to the water volume of your fryer well.
Do I need any special equipment to boil out a fryer?
No special equipment is required. A fryer boil out uses the fryer itself along with hot water, a boil out cleaner, and a fryer brush for any stubborn spots, making it a cleaning task most kitchen teams can handle during a routine shift. Contact us today, (804) 484-7700
Have More Questions?
Connect with our team today and discover the unparallelled support you will receive from Performance Foodservice Denver.
A sales representative will be in touch with you shortly to answer any additional questions.
Commerce City, CO 80640

Order by
Phone
Speak directly with our knowledgeable customer service team for personalized assistance, product recommendations, and immediate order placement.


